Welcome to
 

 

 

 

 

 

 

 Manufacturers of Air Conditioning Equipment

 



Technical Specifications








 
  • Air Cooled Packaged Units

  • MDP-R (R407c)

  • Cooling Only
    Outdoor Installation
    Cooling Capacity: 19,2 kW - 230,4 kW
    R407c  Scroll or Tandem Scroll.

  • The Interklima MDP-R (R407c) series packaged air to air units are the ideal solution for cooling applications and outdoor installation. They are available in 13 models with nominal ca¬pacities ranging from 19,2 kW up to 230,4kW.

    This extensive Interklima series is the ideal solution to provide comfort cooling to large rooms and spaces such as department stores or warehouses. The units can be in¬stalled on the roof or on the ground. Supply and return air is distributed via ducts, ena¬bling an optimized air distribution exposing only the inlet and discharge grills.

    Features

    • Optimized design for R407c refrigerant.
    • Compact design.
    • Scroll or Tandem scroll compressors.
    • Condensers with inner grooved copper tubes, louvered aluminium fins and low speed axial fans.
    • DX evaporators with copper tubes and aluminium fins.
    • Double inlet centrifugal fans and IP54, class F, 3-phase motors.
    • Evaporator section with thermal barrier profiles and 40mm double skin panels (poiyurethan or mineral wool insulation).
    • Galvanized casing having an electrostatically applied powder COE on both sides, coloured RAL9002 and having a thickness of 60|i and a corroson resistance of 500h to salt spray test.
    • IP65 flash mounted electric board.
    • Fully microprocessor controlled, including continuous fan control based on ambient temperature.
    • Low noise operation.
    • Many optional accessories.

     

  • MDP-R  (R134a)

  • Cooling Only
    Outdoor Installation
    Cooling Capacity: 19,2 kW - 230,4 kW
    R407c  Scroll or Tandem Scroll.

  • The MDP-R (R134a) air cooled condensing unit series is available in cooling only versions able to cover a wide capacity range with models from 27 up to 273 kW.

    The Interklima MDP series covers all the technological and high aesthetic demands of the market. The units are completely assembled and tested and ready to be installed with the corresponding indoor unit.

    Features

    • Optimized design for R134a refrigerant.
    • Operating up to 52oC ambient temperature Casing: galvanized steel plate with polyester coating
    • Assembly: Fully bolted/welding free Compressor: Scroll, Tandem Scroll and Screw Safety and functional devices:
    • - high/low pressure manometers
    • - service valves
    • - phase sequence - phase failure - reverse phase and voltage - monitoring device
    • - relays and controls for compressors
    • - optional ability to install digital controller to control indoor/outdoor operation

     

  •  

    MDP-H

    Heat Pump

    Outdoor Installation
    Cooling Capacity:  19,2 kW - 230,4 kW
    Heating capacity: 20,1 kW - 242.0 kW
    R407c  Scroll or Tandem Scroll

    The Interklima MDP series packaged air to air units are the ideal solution for cooling applications and outdoor installation. They are available in 13 models with nominal capacities ranging from 19,2 kW up to 230,4kW in cooling and 20.1kW to 242.0 in heating.

    This extensive Interklima series is the ideal solution to provide comfort cooling to large rooms and spaces such as department stores or warehouses. The units can be in¬stalled on the roof or on the ground. Supply and return air is distributed via ducts, ena¬bling an optimized air distribution exposing only the inlet and discharge grills.

    Features

    • Optimized design for R407c refrigerant.
    • Compact design.
    • Scroll or Tandem scroll compressors.
    • Condensers with inner grooved copper tubes, louvered aluminium fins and low speed axial fans.
    • DX evaporators with copper tubes and aluminium fins.
    • Double inlet centrifugal fans and IP54, class F, 3-phase motors.
    • Evaporator section with thermal barrier profiles and 40mm double skin panels (poiyurethan or mineral wool insulation).
    • Galvanized casing having an electrostatically applied powder COE on both sides, coloured RAL9002 and having a thickness of 60|i and a corroson resistance of 500h to salt spray test.
    • IP65 flash mounted electric board.
    • Fully microprocessor controlled, including continuous fan control based on ambient temperature.
    • Low noise operation.
    • Many optional accessories.

     


 
 
 

 

 
 
 

Αυτόνομες κλιματιστικές μονάδες MDP